Muss eine beschädigte Regalanlage komplett ersetzt werden?

In den meisten Fällen nicht. Ein angefahrener Rahmen oder eine verformte Traverse lässt sich instand setzen oder als Einzelteil tauschen – das ist deutlich günstiger als eine neue Anlage und schneller verfügbar. Wir beurteilen den Schaden, führen die Reparatur aus und dokumentieren sie, sodass die wiederkehrende Prüfung darauf aufsetzen kann. Nur wo die Tragfähigkeit nicht wiederherstellbar ist, raten wir zum Austausch.

Können Sie im laufenden Lagerbetrieb arbeiten?

Ja, dann arbeiten wir bereichsweise. Ein Abschnitt wird geräumt und abgesperrt, dort bauen wir um oder auf, danach wandert der Bereich weiter. So bleibt der Rest des Lagers nutzbar. Wie groß die Abschnitte sein können, hängt von Ihrer Umlagerungsmöglichkeit ab – das klären wir beim Aufmaß.

Bauen Sie auch ab und räumen Hallen?

Ja, das gehört ausdrücklich dazu. Wir demontieren Regale, Einrichtung und Anlagen fachgerecht, sortieren nach Verwertung und Entsorgung und übergeben die Fläche ohne Schäden am Gebäude. Gerade bei Standortverlagerungen ist das oft der Teil, für den sich sonst niemand zuständig fühlt.

Übernehmen Sie auch den Anschluss von Wasser, Strom und Druckluft?

Im üblichen Umfang ja. Teilewaschanlagen und Hochdruckreiniger-Stationen binden wir an, biegen Rohrleitungen vor Ort passend, schließen an und nehmen in Betrieb. Mechanik und Elektrik kommen dabei aus demselben Team. Den Hausanschluss und die formale Abnahme übernimmt Ihr Fachbetrieb oder Sachverständiger.

Richten Sie auch komplette Werkstätten ein?

Ja. Montage- und Prüfplätze, Schubladenschränke, Arbeitstische, Beleuchtung und Medienanbindung – wir stellen die Einrichtung nicht nur ab, sondern bauen sie auf, richten sie aus und übergeben sie einsatzbereit. Auf Wunsch inklusive Demontage der alten Einrichtung.

In welchen Regionen sind Sie tätig?

Unser Sitz ist Rodgau bei Frankfurt, Schwerpunkt ist das Rhein-Main-Gebiet. Für größere Maßnahmen sind wir bundesweit unterwegs – unter anderem im Raum Fulda, in Mainz und in Kassel.

BETRIEBSAUSSTATTUNG: WAS IN DIE HALLE GEHT

Racking, workstations, test bays, washing plants: in industrial operations we install what belongs in the hall – and take it out again when it has to go.

20+

years of industrial installation

8 m

cantilever racks installed

A–Z

Installation and removal from one source

24/7

fitters on the job

Request a callback View projects

EINE FIRMA FÜR ALLES, WAS IN DER HALLE STEHT

Operational equipment is rarely a single trade. A new warehouse needs racking, impact protection and lighting. A new workshop needs workstations, cabinets, compressed air and power. And whoever clears a hall needs someone who also takes things out again – cleanly and without damaging the building.

That is exactly what we do: in industrial companies we install and remove whatever goes into the hall. Mechanics, metalwork and electrics come from the same team, so you are not coordinating three companies waiting on each other.

And where something is damaged, we look at repair first. A racking frame that has been hit does not automatically mean a whole new racking system.

FOUR REASONS WHY COMPANIES CALL US IN

Everything that goes into the hall

From racking through test bays to washing plants: we install and remove what an industrial operation needs in its hall – one point of contact instead of one company per trade.

Racking & storage technology, complete

Installing, converting and extending cantilever, pallet and high-bay racking up to around eight metres – including in sensitive areas and alongside live warehouse operations.

Repair instead of replace

A frame that has been hit is no reason for a new system. We repair racking, replace individual components and document the work for the inspection.

Workshop & workstations

Assembly and test bays, drawer cabinets, workbenches, lighting: set up, connected and handed over ready for use – not just delivered.

WAS WIR IN DER BETRIEBSAUSSTATTUNG ÜBERNEHMEN

From a single cabinet to a complete hall fit-out – installed, converted, repaired and removed.

Racking & storage technology

Installing, extending and relocating cantilever, pallet and high-bay racking. Including alignment, anchoring and documentation for the recurring inspection.

Racking repair & impact protection

Repairing or replacing damaged frames and beams, adding impact and collision protection – so the same damage does not come back in six months.

Workshop & workstations

Building assembly, test and final assembly bays, installing drawer cabinets and workbenches, connecting lighting and compressed air – handed over ready to use.

Washing & cleaning technology

Installing and connecting parts washing systems and wall-mounted pressure washer stations: pipework bent on site, water and power connected, commissioned.

Room modules & containers

Positioning, joining and commissioning office containers and room modules – with plumbing, power and air conditioning where needed. And removing them again when they have to go.

Dismantling & clearance

Clearing halls and areas: dismantling, sorting and removing plant and equipment properly – without leaving damage to the building.

EVERY INDUSTRY HAS ITS OWN RHYTHM

A hall fit-out follows different rules than a repair on the line. Knowing both makes for realistic planning.

Automotive & Mechanical Engineering

The weekend window

Production on two or three shifts, downtime only at weekends. The window is fixed – what fits into it is decided in advance.

business equipment

The space that has to be cleared

Here the bottleneck is not time but space. We work area by area: clear, install, move on – so operations are never left completely without their floor space.

Logistics & intralogistics

The night between two peaks

Sorting and loading equipment runs at its limit seasonally. Repairs happen at night, at weekends or alongside operations – and before the peak season, not in the middle of it.

HOW A HALL FIT-OUT SUCCEEDS

01SITE SURVEYChecking floor space, heights and substrate, clarifying access and storage areas, agreeing with you what stays and what goes.

02PREPARATIONScheduling material, prefabricating special parts, sequencing areas and order – so the floor space is never blocked longer than necessary.

03DELIVERYClearing, installing and connecting area by area. Anchoring, aligning, connecting electrics and services – in planned sections.

04HANDOVERFunction test, instruction, documentation for the recurring inspection – and a broom-clean floor.

PROJECTS FROM OPERATIONAL EQUIPMENT

No marketing copy – documented jobs with real findings, all in our job diary.

Reparierter Regalrahmen einer Lagerregalanlage nach dem Anfahrschaden

REPAIR · FULDA AREA Racking system repaired instead of replaced Impact damage to a racking frame: components repaired and replaced instead of exchanging the entire system – at a fraction of the cost. Read the project

Fertig montierte Teilewaschanlage mit ausgefahrenem Korb

INSTALLATION · VEHICLE WORKSHOP KASSEL Parts washing system installed and connected Positioned, pipework bent to fit on site, water and power connected and commissioned – handed over ready for use. Read the project

Aufgebaute Batterie-Teststation als Prüfplatz in der Fertigung

TEST BAY · PRODUCTION Battery test station built From the frame to the services connection: test bay built, aligned and handed over for series production. Read the project

OPERATIONAL EQUIPMENT: ANSWERED DIRECTLY

Does a damaged racking system have to be replaced completely?

In most cases, no. A frame that has been hit or a deformed beam can be repaired or replaced as a single component – considerably cheaper than a new system and available faster. We assess the damage, carry out the repair and document it so the recurring inspection can build on it. Only where the load capacity cannot be restored do we recommend replacement.

Can you work during live warehouse operations?

Yes, in that case we work area by area. One section is cleared and cordoned off, we convert or install there, then the working area moves on. That keeps the rest of the warehouse usable. How large the sections can be depends on your capacity to relocate stock – we clarify that during the site survey.

Do you also dismantle and clear halls?

Yes, that is explicitly part of it. We dismantle racking, equipment and plant properly, sort by recycling and disposal and hand over the area without damage to the building. In site relocations in particular this is often the part nobody else feels responsible for.

Do you also handle water, power and compressed air connections?

Within the usual scope, yes. We connect parts washing systems and pressure washer stations, bend pipework to fit on site, connect it and commission it. Mechanics and electrics come from the same team. The building service connection and the formal acceptance are handled by your specialist contractor or inspector.

Do you also fit out complete workshops?

Yes. Assembly and test bays, drawer cabinets, workbenches, lighting and services connections – we do not just drop the equipment off, we install it, align it and hand it over ready for use. On request including the removal of the old equipment.

Which regions do you operate in?

We are based in Rodgau near Frankfurt, with a focus on the Rhine-Main region. For larger projects we travel throughout Germany – including the Fulda area, Mainz and Kassel.

ZU HAUSE IN MEHREREN BRANCHEN

Supervisor und Rigger im abgestimmten Einsatz an der Anlage

Data centres The operation with no off switch Lifting, rigging and installation of heavy equipment – in new builds and in live data centres alike. View service area

Torsteuerung, Steckdosen und neuer Rampen-Schaltschrank im Gebäudeinneren

Logistics & intralogistics The night between two peaks Loading and conveying systems, statutory inspection repairs, series rollouts across many sites. View service area

Fertig montierter Not-Aus-Taster an der Paket-Sortieranlage

Airport & security areas The operation that never closes Fitters with aviation security clearance, baggage and cargo handling systems, 24/6 sorter support. View service area

Merlin Gerin Compact NS630N Leistungsschalter im Anschlussfeld

Energy & emergency power The window that must not exist Standby power units up to 3 MW, generator servicing, exhaust and silencer systems. View service area

Lagerstelle im EHB-Gehänge nach dem Einsetzen des neuen Bolzens

Food & beverage Between two cleaning cycles Bakery and food processing machinery, overhead conveyors in hygiene areas, machine relocations. View service area

Kransteuerung an der Brücke – montiert bis zur Übergabe an den Betriebselektriker

crane construction The moving hall section Overhead, gantry and jib cranes including runways – including replacements on an existing runway. View service area

Hallenneubau während der Montage – Palettenregale und Kragarmregal-Bauteile

business equipment The space that has to be cleared Racking and storage systems, workshop bays, washing plants – installed and dismantled. You are here

Revidierter Umlenkblock des EHB-Hebers nach dem Wiedereinbau

Automotive & Mechanical Engineering The weekend window Keeping to shutdown windows, overhead conveyors, plant conversions in step with the line. View service area

Vorher-Nachher: aufgerissenes und fertig verschliffenes Schienenprofil

Steel structures & access platforms The hot work permit Platforms, stairs, custom structures – welded where the plant stands. View service area

Your sector is not listed? No problem.

We work outside these nine areas too. They show our team’s core subjects, cover a wide range and make clear what is possible. If your business or your plant does not appear here, simply get in touch – we find a solution for everyone.

Send an enquiry

DOES A HALL NEED FITTING OUT OR CLEARING?

Tell us briefly what it is about – we will come back to you with a realistic assessment of scope, sequence and timeframe.

100% free of charge and without obligation · Omega Mounting GmbH, Rodgau near Frankfurt